Switching between the Built-in Flash Adjustment Settings (continued)Compensating the Flash Output.

In mode or when [Flash Adjust] is set to [Manual], the flash output can be controlled in three steps, starting from FULL, when shooting. This setting is also active with slave flash photography where multiple flashes are fired at the subject from different positions because the pre-flash does not fire.

1Press the / / button.

2Select (Flash Output) using C or D on the multicontroller.

3Adjust the compensation using B or A on the multicontroller.

You can shoot the image right after selecting

settings by pressing the shutter button. This e.g. Flash Output screen will appear again, once the image is shot.

4Press the / / button.

5Shoot the image.

Some settings are not available with certain Shooting modes. Please refer to Functions Available in Each Shooting Mode (p. 180).

94