Connecting the Camera to a Printer

You can make clear prints swiftly and easily when you connect the camera to an optional direct print function compatible printer (CP series) or a direct print function compatible Bubble Jet printer (optional). It can also be used with DPOF print settings.

You are recommended to use the optional AC Adapter Kit ACK700 to power the camera when it is connected to the printer. If you are using a battery pack, ensure that it is fully charged.

• Refer to the System Map included with this camera kit for information on direct print compatible printers (CP series).

•Please see your printer’s user guide for instructions on loading paper and installing ink cartridges.

Connecting to a Direct Print Function Compatible Printer (CP Series)

Two direct interface cables are supplied with the printer. Use the cable (DIF-100) that has a symbol on the connector to connect to this camera.

1Turn off the camera (p. 24).

2Attach the power cable to the printer and plug the other end into power supply, or install the printer’s rechargeable battery.

Depending on the type of printer you have, it may or may not use rechargeable batteries. Refer to your printer’s user guide.

3

 

Connect the camera and printer using

 

the direct interface cable.

 

 

When you insert the cable, make sure the

 

to Printer

mark of the cable faces the rear of the camera

 

(monitor side).

 

 

DIGITAL Terminal

Direct Interface

Cable DIF-100

126