Installing the Battery Pack

Install Battery Pack NB-2L (supplied) into the camera as follows. We recommend that you use the AC Adapter Kit ACK700 (optional) to power the camera for extended periods (p. 162).

1 Turn off the camera (p. 24).

Check that the power/mode indicator is not lit.

2

2

Slide the CF card slot/battery cover in

the direction of the arrow to open the

 

 

 

cover.

 

1

 

the Camera, Basic Functions

3

Battery lock

Hold back the battery lock in the direction of the arrow with the corner of the battery pack, then insert the battery pack into the compartment until it is locked.

To remove the battery pack, release the battery lock.

Preparing

4

Close the CF card slot/battery cover

then slide it to the original position

 

until it clicks.

•Charge the battery pack before using it the first time (p. 15).

•When the upper indicator on the left side of the viewfinder is blinking green, the CF card is being written to, read, erased or transmitted to. Therefore, never turn off the camera or open the CF card slot/battery cover while this indicator is blinking green.

•Remove the battery pack when the camera is not in use.

17