Attaching Sound Annotations to Images

In replay mode (including single replay, index replay, magnifying replay and the replay immediately after shooting in Shooting mode) you can attach sound annotations (up to 60 seconds) to an image. The sound data is saved in WAVE format.

1 Press the button while replaying images. The A / V panel appears.

2Select (Record) using B or A on the

multicontroller, then press .

•The recording starts and the elapsed time is displayed. Speak towards the microphone of the camera.

•To stop recording, press . To restart recording,

press again.

•You can add as many sound annotations as you like until their total time reaches 60 seconds.

Playing back the Sound Annotations

Select

(Replay) in step 2 above. Images with sound annotations are displayed with the

mark (simple display or detailed display). To start playback, press

. To stop playback,

press

again. You can adjust the volume using C or D on the multicontroller.

Erasing the Sound Annotations

Select (Erase) in step 2 above.

Exiting the Sound Annotations Menu

Press the button.

•You cannot attach sound annotation to movies.

•You cannot record or playback sound notes for images that already have an incompatible sound file attached. If you attempt to record or play such images, the “Incompatible WAVE format” message will display. Incompatible sound files can be deleted with this camera.

•Sound annotations for protected images cannot be erased. (p. 118).

The volume can be adjusted in the Setup menu (p. 152).

Replaying, Erasing

113