Automated Playback (Slide Show)

Slide show image settings are based on DPOF standards (p. 122).

Starting a Slide Show

All images, or a selection of images, can be displayed one-by-one in an automated slide show.

All Images Plays all the images on the CF card in order

Slide Show 1 - 3 Plays the images selected for each show in order (p. 115)

1In the [ (Replay)] menu, select [Slide

Show] and press .

See Selecting Menus and Settings (p. 36).

2Select [Program] using C or D on the multicontroller. Then select between [All Images] or one of [Show 1]-[Show 3] using B or A on the multicontroller.

3Select [Start] using C or D on the

multicontroller and press .

The slide show will start and automatically stop when the show is done.

Pausing and Resuming a Slide Show

Press to pause the show. Press it again to resume.

Fast Forward / Rewinding a Slide Show

Use B or A on the multicontroller to move to the previous or next image.

Stopping a Slide Show

Press the button during a slide show to stop it and display the slide show menu.

4 When the slide show is over, press the button.

The slide show menu appears again. Press the button again to close the menu.

• Movie images play for the length of time that they were recorded regardless of the time set in the slide show settings.

• The power-saving function is disabled while a slide show plays on the camera (p. 25).

114