OSD Functions

Characters and icons become highlighted in blue during adjustment for each menu.

PC Control Video Control Audio Control Function Control

1. PC Control

For detailed information on Screen Adjustment in the PC mode, refer to PC mode Screen

Adjustment Animation Clips.

Brightness

Adjust Brightness.

Contrast

Adjust Contrast.

Color Temperature

The tone of color can be changed. The individual color components are also user customizable.

1)Mode 1 : High Temperature.

2)Mode 2 : Middle Temperature.

3)Mode 3 : Low Temperature.

4)User Mode : User customizable.

Image

PC Screen Settings.

1) Image Lock

Image Lock is used to fine tune and get the best image by removing noises that creates unstable images with jitters and shimmers. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again.

•Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu.

•Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed).

•Reset : Image lock and position parameters are replaced with the factory default values.

2)Image Size

Allows choosing from different image sizes.

Varies depending on the resolution or signal ratio. The Expand 1, Expand 2 and 1:1 functions work only in PC RGB.

•Expand 1 : Performs full screen image expansion. (No change if the resolution is set at maximum)

•Expand 2 : Performs image expansion while maintaining the vertical/horizontal aspect ratio of the original video resolution. (No change if the resolution is set at maximum)

•1 : 1 Displays the image as created by the signal source.

(No change if the resolution is set at maximum.)

Position

This adjusts the screen location horizontally and vertically.