power on and volume control

tUrning tHe POWer On/Off

DOCK

FUNCTION

or

VOL

FUNCTION

MUTE

BASS

MUTE

1. To turn on this unit, press any button on the unit's top panel when the unit is in Standby mode. or,

Press Power on the remote control.

2. To turn off this unit, press the +# button on the unit's top panel for more than 3 seconds. or,

Press Power on the remote control again.

▪it will take about 20 seconds until the power of the unit turns on because of the preheating time of the amplifier.

aDJUsting tHe VOLUMe

Use +,- buttons to adjust the volume. The function LEDs light from left to right when you turn the volume up and from right to left when you turn the volume down. The LEDs do not light if you try to increase the volume when it has already been set to maximum or try to decrease the volume when it has already been set to minimum.

DOCK

FUNCTION

or

MUTE

MUTE

VOL

Press the +/– button on the right side of the top panel. or,

Press vol +/– on the remote control.

▪ The volume level increases or decreases when you press VOL +/–.

BASS

VOL

BASS

▪You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control the volume. However, your ability to control the volume using the volume controls of devices connected using Bluetooth may be limited.

10