Samsung DM-B58AHC/XET Fixing in the Niche, SOUND-PROOFING Seals, Appliances BUILT-IN Under a HOB

EN 2 / INSTALLING YOUR DISHWASHER

•APPLIANCES BUILT-IN UNDER A HOB

Danger:

If your worktop has a hob fitted above your dishwasher, you must fit thermal insulation on top of your dishwasher. You can obtain an insulation kit from your dealer. Remember to leave a space between the gas pipe and the top of your dishwasher.

• FIXING IN THE NICHE

Fasten the dishwasher under the worktop with the screws P9 (see Fig. 7) or using the flanges you have unfolded (Fig. 3.2).

Warning:

The screw provided is intended for a panel at least 16mm thick. If the panel is less than 16mm thick, change the screw or shor- ten it.

•SOUND-PROOFING SEALS

To improve the built-in appliance’s sound- proofing, fit the sound-proofing seals (depen- ding on the model). ( P5 P11 on Fig. 8)

If the recess is bigger, stick on seal P5 using the adhesives provided.

If the appliance is laterally secured, a cut must be made in the seals' P5 heels to allow the retaining brackets to

be passed through (nipper).

•BALANCING THE DOOR (LEFT AND RIGHT)

Adjust the tension on the springs, if neces- sary, to compensate for the weight of the clad- ding panel. Adjust them identically on the right and the left (Fig. 9).

The door is correctly balanced when it dopes not fall heavily on opening and it remains hori- zontal in the open position.

Fig. 7

Fig. 8

Fig. 9

11