setting up your dishwasher
CONTROL PANEL
DMT800 Series
1 | 2 | 3 | 4 | 5 | 6 |
| 7 | 8 | 9 |
|
|
| |
|
| Displays wash information (Delay start hours, Child lock/unlock, Low rinse), | |
|
| and error messages. |
|
1 | DISPLAY | When Low rinse remains illuminated, there is no rinse agent in the dispenser. | |
Refill the rinse aid dispenser. |
| ||
|
|
| |
|
| If an error occurs during an operation, an error message is displayed with a | |
|
| warning sound. Refer to the Information codes page. (see page 25) | |
|
|
| |
2 | DELAY START | Delay a cycle for up to 24 hours in | |
indicates the time at which the wash will be started. |
| ||
|
|
| |
|
|
| |
|
| The temperature rises to 162 ˚F (72 ˚C) in the final rinse cycle for high | |
|
| temperature sanitization. |
|
|
| If you select the Sanitize option, the “Sanitize” lamp blinks when the water | |
|
| temperature reaches the sanitary temperature (over 155 ˚F (68 ˚C)), and then | |
|
| remains illuminated until the Sanitze option ends. When you open the door | |
|
| or press Power button, the “Sanitize” lamp turns off. |
|
3 | SANITIZE | You cannot select the Delicate cycle if you select the Sanitize option. | |
|
| ||
The Sanitize feature is in accordance with NSF/ANSI Standard 184 for Residential Dishwashers. Certified residential dishwashers are not intended for licensed food establishments. Your dishwasher is NSF Certified.
The cycle that is NSF certified is the Heavy Cycle with the sanitize option selected.
8_ setting up your dishwasher
