ALIGNMENT AND ADJUSTMENTS
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before servicing, unless testing requires power.
Continuous Run Mode
Power On state |
| Mixed Load Bell +Dry Level(DV431) or |
(Normal user mode) |
| Wrinkle Prevent + Time(DV231) 7 SEC |
|
|
|
Continuous Run Mode
How to enter:
-Press Mixed Load Bell +Dry Level(DV431) or Wrinkle Prevent + Time(DV231) for 7 sec during Power On State (normal user mode).
-Once in Continuous Run Mode, display “CC” for 1 sec and the remaining time for 2 sec in turns.
-The previous cycle will restart during Continuous Run Mode until the mode is deactivated.
-During Continuous Run Mode, press Mixed Load Bell +Dry Level(DV431) or Wrinkle Prevent + Time(DV231) for 7 seconds to go back to normal user mode.
Data Display Mode (DV431 only)
How to Enter:
-With Power On, press AdjustUp Key + AdjsutDown Key for 7 seconds until it sends out a beeping sound .
-If not pressed any keys for 5 minutes, it will be set back from Data Display Mode
-If pressing AdjustUp Key in this mode, Display Mode will be incresed.
-If pressing AdjustDown Key in this mode, Display Mode will be decresed.
Definition of Data Display Mode:
-Display Mode 1 : Temperature data
-Display Mode 2 : Average Touch Sensor data for 1 minute
-Display Mode 3 : Average Temperature data for 1 minute
4
