A
A.
B
B.Screw
4.Install bracket to dryer.
•Remove washer top cap screw from the rear left. Align left bracket holes with top cap screw hole on rear left of the unit and replace screw.
•Repeat the above step with the right side.
NOTE
Leave screw loose so dryer hole alignment will be easier.
5.Install dryer and bracket on washer
WARNING
•Lift the dryer on top of the washer. Protect the washer control panel with cardboard or other protection. Be sure to lift the dryer high enough to clear the washer control panel.
Personal Injury. More than two people are recommended to lift the dryer into position because of its weight and size. Failure to do so could result in injury.
•Align the holes in the bracket with the holes in the back of the dryer. Using a Phillips screwdriver, attach the
M4 x 12 tapping screws.
•Tighten the washer bracket screws ; then tighten all stacking kit screws.
