Problem | Solution |
•Seams, pockets, and other similarly heavy areas may not be completely dry when the rest of the load has reached the selected dryness level. This is normal. Select the EXTRA
| DRY setting if desired. |
Dries unevenly. | • If one heavy item is dried with a lightweight load, such as |
| one towel with sheets, it is possible that the heavy item |
| will not be completely dry when the rest of the load has |
| reached the selected dryness level. Sort heavy items from |
| lightweight items for best drying results. |
| • Household odors from painting, varnishing, strong | ||
|
| cleaners, etc. may enter the dryer with the surrounding | |
|
| room air. This is normal as the dryer draws the air from | |
Has an odour. |
| the room, heats it, pulls it through the tumbler, and | |
|
| exhausts it outside. | |
| • When these odors linger in the air, ventilate the room | ||
|
| completely before using the dryer. | |
|
| ||
| • Dryer load is too small. Add more items or a few towels | ||
Shuts off before load is |
| and restart the cycle. | |
dry. | • | Dryer load is too large. Remove some items and restart the | |
|
| dryer. | |
|
|
| |
| • | Make sure the case filter is cleaned before every load. | |
|
| With some loads that produce high amounts of lint, it may | |
|
| be necessary to clean the filter case during the cycle. | |
| • Some fabrics are lint producers (for example, a fuzzy white | ||
Lint on clothes. |
| cotton towel) and they should be dried separately from | |
| clothes that are lint trappers. (for example, a pair of black | ||
|
| ||
|
| linen pants) | |
| • Divide larger loads into smaller loads for drying | ||
| • Check pockets thoroughly before drying and drying | ||
|
| clothes. | |
|
|
| |
Garments still wrinkled | • | Small loads of 1 to 4 items work best. | |
after Wrinkle Prevent. | • | Load fewer garments. Load | |
|
|
| |
Odours remain in | • Fabrics containing strong odors should be washed. | ||
clothing after Cool air. | |||
|
| ||
Troubleshooting
