Presetting the Stations Automatically, Vcr | Samsung DVD-CM500H/XEF

Presetting the Stations Automatically

VCR

☛You do not need to preset the stations if you have already set them automatically (see Plug & Auto Set Up on page 13).

Your DVD-VCR contains a built-in tuner used to receive television broadcasts.

You must preset the stations received through the tuner. This can be done:

◆Plug & Auto Set up (see page 13)

◆Automatically

◆Manually (see page 20)

You can store up to 80 stations.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the Install
	option.

3Press the OK or ❿ to select this option. Result: The Install menu is displayed.

4	Press the corresponding or ❷ buttons, until the Auto
	Setup is selected.
	And then press the OK or ❿ to select this option.
	Result:	The country selection is displayed.

5	Press the	or ❷ buttons to select your country.
	☛ The VCR searches for the stations according to a preset

preference list corresponding to the country that you have selected.

6Press OK button.

Result: A message appears, indicating that any channels already preset on your VCR will be deleted.

7Press OK to start the auto scanning.

Result: ◆ The Please Wait indication highlight on the television screen.

◆The first frequency band is scanned and the first station found is displayed and stored.

◆The DVD-VCR then searches for the second station and so on.

◆When the automatic scanning procedure has finished, the DVD-VCR switches automatically to programme 1.

➢The number of stations automatically stored by the DVD- VCR depends on the number of stations that it has found.

8If you wish to cancel the auto scanning before the end, press the MENU button to exit the menu.

➢Once the auto scanning procedure has finished, some stations may have been stored more than once; select the stations with the best reception and delete the ones no longer required (see page 21).

Language : English

Install	GB
User Set
Auto Power Off	: Off
Screen Messages	: On

Install

Auto Setup
Manual Setup
TV System	: K
VCR Output CH	: CH 36

Auto Setup

Your data will be lost

Press OK to continue

Menu to exit

Auto Setup

Please Wait

15%

19

Image 19

Samsung DVD-CM500H/XEF manual Presetting the Stations Automatically, Vcr

Contents

DVD-CM500 GB Contents Playing Back Symbols Following illustrations represent precautions Safety Instructions Disc Markings Disc Type and CharacteristicsPlayback Region Number Rear View of the DVD-VCR Front View of the DVD-VCR 33 UP 34 OK Infrared Remote ControlShuttle PROG/TRK Accessories Display IndicatorsCopy mode indicator Recommended Use Deciding How to Connect DVD-VCRYour DVD-VCR is equipped with the following connectors Connector Location Type Connecting DVD-VCR to the TV using the Scart Cable Connecting DVD-VCR to the TV using the Coaxial Cable By means of RF Coaxial Cable AV1EURO AV By means of 21-pin Scart CableAV2 in By means of 21-pin Scart Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR VCR Button Deck Control KeysSTANDBY/ON Button DVD Button Find that the remote control is no longer working correctly Inserting Batteries in the Remote ControlBasic TV Tuner Operations Copy the DVD to VHS Tape Copying from DVD to VCRInsert VHS Tape Insert a blank VHS videotape into the VCR deck Select Language Setting the Date and TimeSetting the Menu Language Open Menu VCR Presetting the Stations Automatically Picture, if necessary Presetting the Stations Manually13 To...Then If you Then Result The TV Station Table menu is displayed Clearing a Preset StationPress the OK or ❿ to select a Manual Setup option Press the corresponding Or ❷ buttons, until the Manual Television screen Changing the Preset Station Table Setting the DVD-VCR Output Channel Selecting the RF OUT Sound Mode B/G-D/K Conditions Selecting the Colour ModeOK or ❿, until Distorted due to inferior reception Intelligent Picture Control Off 1Hour 2Hour 3Hour Auto Power OffShowView Extend Press the corresponding or ❷ buttons, until E180 E240 300 E260 Screen MessagesSelecting the Cassette Type Press OK or ❿, until VHS Play Repeat PlayDVD-VCR allows you to playback high quality S-VHS tapes Selecting the Recording Speed VCR Recording a Programme Immediately VCR Protecting a Recorded Cassette Recording a Programme with Automatic Stop If you wish to cancel the recording before the end, press Pressing VCR Using the ShowView If you wish to Then Modifying ShowView ProgrammingSelect the recording speed Press the OK or ❿ button to select Standard option Using the Timer Programming FeaturePreset Insert the cassette and press Timer on the remote control Cancelling a Preset Recording Checking a Preset Recording Playing a Cassette Adjusting Picture Alignment ManuallyThen press You can play a cassette in slow motion Selecting the Audio Output ModePlaying a Cassette in Slow Motion Option Description Playing a Sequence at Variable Speeds Seq Searching for a Specific SequencePrev Next Buttons, until the Intro Scan option is selected Intro Scan Using the Tape Counter VCR Connecting an RCA Audio/Video Input Cable Recoding from Another VCR or Camcorder CD, DVD Audio Dubbing a Pre-recorded Cassette Brand Codes Using the TV Buttons on the Remote ControlButton Function Connection to an Television Choosing a ConnectionJack Using the Disc Menu Language Setting Up the Language Features Using the Subtitle Language Using the Audio LanguagePress the ,❷ buttons to select ‘English’ Setting Up the Audio Options About the Rating Level Setting Up the Parental ControlAbout the Change Password ❿ button Connect S-Video Out to TV Setting Up the Display OptionsSends Component Interlace signal from Video Connections for DVD To Component Input on Your TV DVD Component Connections for DVD Special Playback Features For 43 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD If you are using a 169 TV For 169 aspect ratio discs Pan Scan If you are using a 43 TVDisplays the content of the DVD title in 43 aspect ratio For 169 aspect ratio discs Letter Box When Playing a DVD Using the Display Function DVD/VCD/CD Selecting the Subtitle Language Using the Angle buttonUsing the Subtitle button Changing the Camera Angle DVD Repeat Play Using the Zoom DVD/VCD Selecting the Audio Language Repeat Chapter/Title Clearing a Mark DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD Recalling a Marked Scene Select the track, and then press the OK button. Playback MP3-CD PlaybackList of albums in the folder will appear To view the next album, press the Return button WMA Disc Playback WMA Play Your MP3 or WMA files should be ISO 9660 or Joliet format MP3/WMA PlayDo not try recording copyright protected MP3 files Then press the OK button Program Play & Random Play Thumbnail screen Picture CD Playback CD-R Jpeg Discs Distance of a m Setting ms Distance of B m Setting the Delay TimeSetting the Center Speaker Setting the Surround Speakers Front Speakers About Speaker SetupCenter Speaker Surround Speakers To Test the Speakers To Set the Speaker BalanceTo Set the Bass/Treble Sound Mode Sound Mode FunctionDolby Pro Logic Tune in to the desired station Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Listening to the Radio Presetting Stations Input Technical SpecificationsOutput Check the TV/VCR aerial connections Problems and Solutions VCR Before requesting service troubleshooting Troubleshooting Guide DVDProblem Action Ellas Greece Fourlis Trade A.E.B.E Electronics