Samsung DVD-CM500H/XEF manual Selecting the Colour Mode, OK or ❿, until, Conditions

VCR

Selecting the Colour Mode

	Language	: English
	Install
GB	User Set
	Auto Power Off	: Off
	Screen Messages	: On

User Set

Colour System	: Auto
NICAM	: On
IPC	: On
ShowView Extend	: Off

Auto

PAL MESECAM B/W

Before recording or playing back a cassette, you can select the required system standard.

Otherwise, the system automatically selects the reception standard when you select AUTO.

➢◆ When playing back a cassette, the standard is automatically selected by the DVD-VCR.

◆When you playback an NTSC-recorded tape on this DVD- VCR make a setting on the colour system according to your TV. If your TV is a PAL system only TV, set NTPB. If your TV is Multi System TV (NTSC 4.43 compatible), set NT4.43 and you can record NT4.43.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the
	User Set option.

3Press the OK or ❿ to select this option.

Result: The User Set menu is displayed.

4	Press the corresponding or ❷ buttons, until the Colour
	System option is selected.

5Press the OK or ❿ button to select Auto➝PAL➝MESECAM➝B/W.

Auto When playing back a cassette, the system standard is automatically selected by the DVD-VCR.

B/W Black and White

6On completion, press RETURN three time to exit the menu.

VCR

NICAM

Language : English

Install

User Set

Auto Power Off	: Off
Screen Messages	: On

User Set

Colour System	: Auto
NICAM	: On
IPC	: On
ShowView Extend	: Off

24

NICAM programmes are divided into 3 types. NICAM Stereo, NICAM Mono and Bilingual (transmission in another language). NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound. Please refer to page 37.

1After pressing the MENU, press the OK or ❿ . Result: The Setup menu is displayed.

2	Press the corresponding ,❷ buttons to select the
	User Set option.

3Press the OK or ❿ to select this option.

Result: The User Set menu is displayed.

	4	Press the corresponding		or ❷ buttons, until the NICAM
		options selected.
On	5	To...	Press	OK or ❿, until...
Off
		Mono mode	Off is displayed.
			Off: Only set at this position to record
			the standard mono sound during a
			NICAM broadcast if the stereo sound is
			distorted due to inferior reception
			conditions.
		NICAM mode	On is displayed.
			On: Normally set at this position.

6On completion, press RETURN three times to exit the menu.