ShowView Extend, Auto Power Off | Samsung DVD-CM500H/XEF instruction

VCR

ShowView Extend

Language : English

Install

User Set

	GB	Auto Power Off	: Off
		Screen Messages	: On

User Set

Colour System	: Auto
NICAM	: On
IPC	: On
ShowView Extend	: Off

To prevent delays or over-runs, the VCR has a function called ShowView Extend allowing you to extend the recording time by up to 60 minutes.

➢Only use if PDC is not available or set to Off.

1After pressing the MENU, press the OK or ❿ .

2	Press the corresponding ,❷ buttons to select the User Set
	option.

3Press the OK or ❿ buttons to select this option. Result: The User Set menu is displayed.

4 Press the corresponding or ❷ buttons, until the

	Off	ShowView Extend option is selected.
	10	ShowView Extend option is selected.
	10
	20

305 Press the OK or ❿ buttons to set the ShowView Extend time

40by increments of 10 minutes.

50

60

6 To turn off, press OK or ❿ buttons repeatedly until Off shows.

VCR

Auto Power Off

Language : English

Install

User Set

Auto Power Off	: Off
Screen Messages	: On

Language : English

Install

User Set

Auto Power Off	: Off
Screen Messages	: On

The Auto Power Off feature automatically turns off your DVD- VCR if no signal is received and you do not press any button for the selected time.

1	After pressing the MENU, press the OK or ❿ .
	Result: The Setup menu is displayed.

2	Press the corresponding	or ❷ buttons, until the Auto

Power Off option is selected.

3Press the OK or ❿ buttons, until you select the time of Auto Power Off interval.

Off 1Hour 2Hour 3Hour

4 On completion, press RETURN twice to exit the menu.

Off 1Hour 2Hour 3Hour

26

Image 26

Samsung DVD-CM500H/XEF ShowView Extend, Auto Power Off, Press the corresponding or ❷ buttons, until, Off 1Hour 2Hour 3Hour

Contents

DVD-CM500 GB Contents Playing Back Symbols Safety Instructions Following illustrations represent precautions Playback Region Number Disc Type and CharacteristicsDisc Markings Front View of the DVD-VCR Rear View of the DVD-VCR PROG/TRK Infrared Remote ControlShuttle 33 UP 34 OK Copy mode indicator Display IndicatorsAccessories Connector Location Type Deciding How to Connect DVD-VCRYour DVD-VCR is equipped with the following connectors Recommended Use Connecting DVD-VCR to the TV using the Coaxial Cable Connecting DVD-VCR to the TV using the Scart Cable AV2 in By means of 21-pin Scart Cable AV1EURO AV By means of 21-pin Scart CableBy means of RF Coaxial Cable Plug & Auto Set up Tuning Your Television for the DVD-VCR DVD Button Deck Control KeysSTANDBY/ON Button VCR Button Basic TV Tuner Operations Inserting Batteries in the Remote ControlFind that the remote control is no longer working correctly Insert a blank VHS videotape into the VCR deck Copying from DVD to VCRInsert VHS Tape Copy the DVD to VHS Tape Open Menu Setting the Date and TimeSetting the Menu Language Select Language Presetting the Stations Automatically VCR If you Then Presetting the Stations Manually13 To...Then Picture, if necessary Press the corresponding Or ❷ buttons, until the Manual Clearing a Preset StationPress the OK or ❿ to select a Manual Setup option Result The TV Station Table menu is displayed Changing the Preset Station Table Television screen Selecting the RF OUT Sound Mode B/G-D/K Setting the DVD-VCR Output Channel Distorted due to inferior reception Selecting the Colour ModeOK or ❿, until Conditions Intelligent Picture Control Press the corresponding or ❷ buttons, until Auto Power OffShowView Extend Off 1Hour 2Hour 3Hour Press OK or ❿, until Screen MessagesSelecting the Cassette Type E180 E240 300 E260 DVD-VCR allows you to playback high quality S-VHS tapes Repeat PlayVHS Play Selecting the Recording Speed VCR Protecting a Recorded Cassette VCR Recording a Programme Immediately If you wish to cancel the recording before the end, press Recording a Programme with Automatic Stop VCR Using the ShowView Pressing Select the recording speed Modifying ShowView ProgrammingIf you wish to Then Insert the cassette and press Timer on the remote control Using the Timer Programming FeaturePreset Press the OK or ❿ button to select Standard option Checking a Preset Recording Cancelling a Preset Recording Then press Adjusting Picture Alignment ManuallyPlaying a Cassette Option Description Selecting the Audio Output ModePlaying a Cassette in Slow Motion You can play a cassette in slow motion Playing a Sequence at Variable Speeds Next Searching for a Specific SequencePrev Seq Intro Scan Buttons, until the Intro Scan option is selected Using the Tape Counter VCR Connecting an RCA Audio/Video Input Cable Recoding from Another VCR or Camcorder Audio Dubbing a Pre-recorded Cassette CD, DVD Button Function Using the TV Buttons on the Remote ControlBrand Codes Jack Choosing a ConnectionConnection to an Television Setting Up the Language Features Using the Disc Menu Language Press the ,❷ buttons to select ‘English’ Using the Audio LanguageUsing the Subtitle Language Setting Up the Audio Options ❿ button Setting Up the Parental ControlAbout the Change Password About the Rating Level Video Connections for DVD Setting Up the Display OptionsSends Component Interlace signal from Connect S-Video Out to TV DVD Component Connections for DVD To Component Input on Your TV Special Playback Features If you are using a 169 TV For 169 aspect ratio discs Adjusting the Aspect Ratio EZ ViewTo play back using aspect ratio DVD For 43 aspect ratio discs For 169 aspect ratio discs Letter Box If you are using a 43 TVDisplays the content of the DVD title in 43 aspect ratio Pan Scan Using the Display Function DVD/VCD/CD When Playing a DVD Changing the Camera Angle Using the Angle buttonUsing the Subtitle button Selecting the Subtitle Language Using the Zoom DVD/VCD DVD Repeat Play Repeat Chapter/Title Selecting the Audio Language Recalling a Marked Scene DVD Using the Mark Function DVD/VCDUsing the Mark Function DVD Clearing a Mark To view the next album, press the Return button MP3-CD PlaybackList of albums in the folder will appear Select the track, and then press the OK button. Playback WMA Play WMA Disc Playback Do not try recording copyright protected MP3 files MP3/WMA PlayYour MP3 or WMA files should be ISO 9660 or Joliet format Program Play & Random Play Then press the OK button Picture CD Playback Thumbnail screen CD-R Jpeg Discs Setting the Surround Speakers Setting the Delay TimeSetting the Center Speaker Distance of a m Setting ms Distance of B m Surround Speakers About Speaker SetupCenter Speaker Front Speakers To Set the Bass/Treble To Set the Speaker BalanceTo Test the Speakers Dolby Pro Logic Sound Mode FunctionSound Mode Listening to the Radio Automatic TuningPress and hold l or ❿❿l to begin automatic tuning Tune in to the desired station Presetting Stations Output Technical SpecificationsInput Problems and Solutions VCR Check the TV/VCR aerial connections Problem Action Troubleshooting Guide DVDBefore requesting service troubleshooting Ellas Greece Fourlis Trade A.E.B.E Electronics