Samsung DVD-CM500H/XEF manual DVD Component Connections for DVD, To Component Input on Your TV

DVD Component Connections (for DVD)

DVD Only

SPEAKERS

Component video output is available only for DVD playback. RF and Line input are available for Tuner and VCR playback.

GB

COMPONENT VIDEO OUT FRONT R FRONT L WOOFER

1

SURROUND R SURROUND L CENTER

S-VIDEO OUT

To Component Input on Your TV

Press "OK" to confirm Prorgessive scan mode. Otherwise press "RETURN".

Please set your TV to component input. If your TV doesn't have Progressive scan mode, there will be no signal on the screen.

If your TV set supports Progressive Scan, it can transmit Pr, Pb, and Y signals separately, so you can enjoy sharp and clear picture.

☛What is Progressive Scan?

It is a set of jacks that can provide sharp and clear picture quality by using twice the number of fields of lines than component output.

1Connect the component output of the DVD player to your TV set. Use the component cable to connect the component output on the back panel of the DVD-VCR to the component input of your TV.

◆If you mix up the connections when connecting the component cable, the picture will appear reddish or bluish.

2Set your TV to COMPONENT.

Select component input as your TV's AV input. At this point, even if the picture appears reddish, it is normal.

3Press the P.SCAN button on the front panel.

If the P.SCAN button on the front panel of the DVD-VCR is pressed, a blue LED will light up and the following message will be displayed:

To activate Progressive Scan, press OK.

The following message will be displayed and then the picture will be played in Progressive Scan mode.

4To deactivate Progressive Scan, press the P.SCAN button again. If the P.SCAN button on the front panel of the DVD-VCR is pressed again, a blue LED will light up and Progressive Scan mode will be canceled. Select another mode as your TV's AV input to view another output of the DVD-VCR.

➢This is available only for a TV set that supports Progressive Scan.

•While Progressive Scan is active, video, S-video, and SCART output are not available.

•To activate Progressive Scan, the DVD-VCR must be in Stop mode.

➢You can listen to audio sound through AUX audio output or 5.1CH speakers while watching Component or S-Video output.

52