Samsung DVD-F1080W, DVD-FP580W manual Connecting to a TV Video

C O N N E C T I O N S

Connecting to a TV (Video)

1

Using Video/Audio cables, connect the VIDEO (yellow)/AUDIO (red and white) OUT jacks on the rear of the DVD player to the VIDEO (yellow)/AUDIO (red and white) IN jacks of your TV.

2

Turn on your DVD player and TV.

RED

RED

WHITE	YELLOW
Audio	Video Cable
Cable	(Included)
WHITE	YELLOW

3

Press the input selector button on your TV remote control until the Video signal from the DVD player appears on the TV screen.

Note

-Noise may be generated if the audio cable placed too close to the power cable.

-If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 17 to 18)

-The number and position of the jacks may vary depending on your TV set. Please refer to the user's manual of your TV.

-If there is one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) jack of the DVD player.

-If you press the VIDEO SEL. button when the DVD Player is in stop mode or no disc is inserted, the Video Output mode changes in the following sequence: (I-SCAN ➝ P-SCAN).

ENG-16