Samsung DVD-HD755 manual Connections

Models: DVD-HD755

1 62
Download 62 pages 25.6 Kb
Page 19
Image 19
Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

C O N N E C T I O N

Connection to an Audio System (Dolby digital, MPEG2 or DTS Amplifier)

1

If using a coaxial cable (not included), connect the DIGITAL AUDIO OUT (COAXIAL) terminal on the rear of the DVD player to the DIGITAL AUDIO IN (COAXIAL) terminal of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO, S-VIDEO,COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO,COMPONENT or DVI IN terminals of your TV as described on pages 12 to 16.

3

Turn on the DVD player, TV, and Amplifier.

Connections

Coaxial Cable (not included)

Dolby digital or

DTS amp

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

-When you connect the DVD player to a DTS Amplifier and play a DTS disc, set the DTS to On in Audio Setup menu. If it is set to Off, sound will not be heard, or there will be a loud sound.

-Please turn the volume down when you turn on the Amplifier. Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 50 to 51)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-19

Page 19
Image 19
Samsung DVD-HD755 manual Connections, Connection to an Audio System Dolby digital, MPEG2 or DTS Amplifier