Samsung DVD-HD755 manual Rear Panel, Hdmi Out Jack, Audio Out Jacks, S-Video Out Jack

S E T U P

Rear Panel

56

1 2 3 4

1.HDMI OUT JACK

-Use the HDMI cable to connect this jack to the HDMI jack on your television for the best quality picture.

-If an HDMI cable is connected to an HDMI-compatible TV, HDMI will be output automatically a maximum of 10 seconds later.

-If you want to use a Video, S-Video or Component Output, set the output in the menu (see page 53) or unplug the HDMI cable.

2.AUDIO OUT JACKS

Connect to the Audio input jacks of your television or audio/video receiver

4.S-VIDEO OUT JACK

-Use the S-Video cable to connect this jack to the S-Video jack on your television for higher picture quality.

-The Video Output in Setup Menu must be set to

COMPOSITE/S-VIDEO.

5.DIGITAL AUDIO OUT JACKS

-Use a coaxial digital cable to connect to a compatible Dolby Digital receiver.

-Use a coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.

6.COMPONENT VIDEO OUT JACKS

3.VIDEO OUT JACK

-Use a video cable to connect to the Video input jack on your television.

-The Video Output in Setup Menu must be set to

COMPOSITE/S-VIDEO.

-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.

-If HDMI/COMPONENT(P-SCAN) Video Output is selected in Setup Menu, progressive scan mode will work.

-If Component(I-SCAN) Video Output is selected in Setup Menu, interlaced scan mode will work.

Note

-Consult your TV User’s Manual to find out if your TV supports Progressive Scan (P-SCAN).

If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.

-If HDMI/COMPONENT (P-SCAN) Video Output is selected in Setup Menu, Video and S-Video Outputs do not work.

-The HDMI output of this unit can be connected to a DVI jack on a TV or other device using a conversion adapter. In this case, it is necessary to use a TV or display with an HDCP-compatible DVI input.

-There may be no image output if the DVD player is connected to a TV or display that is not compatible with the above format.

-Refer to the TV's instruction manual for detailed information regarding the HDMI terminal.

-See pages 52 ~ 54 to get more information on how to use the setup menu.

ENG-10