C O N N E C T I O N S

Connection to a TV with Anynet Jack

C O N N E C T I O N S

Connection to an Audio System (2 Channel Amplifier)

What is Anynet?

-The function enables a user to control all AV devices through the menu display on the TV screen just using one single TV remote control.

-This function works only for models supporting the Anynet.

-Using Anynet, you can easily control a DVD Player with your TV.

-For detailed operation steps and connections, refer to the user’s manual that supports Anynet.

-Please note that you need to set the Anynet on the TV to use the Anynet function.

1

Using an Anynet cable, connect the Anynet Input (Green) terminal on the rear side of the DVD player to Anynet Output (Balck) terminal of the TV.

1

Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the DVD player to the AUDIO (red and white) IN terminals of the Amplifier.

2

Using the video signal cable(s), connect the VIDEO, S-VIDEO,COMPONENT or HDMI OUT terminals on the rear of the DVD player to the VIDEO, S-VIDEO,COMPONENT, HDMI or DVI IN terminal of your TV as described on pages 12 to 16.

3

Turn on the DVD player, TV, and Amplifier.

RED WHITE

Audio Cable

Connections

2

 

 

DVD Receiver

Using an Anynet cable, connect the Anynet Output (Black)

 

 

BLACK

 

GREEN

terminal to Anynet Input (Green) terminal of other AV device.

 

 

AV Receiver

 

 

GREEN

 

GREEN

BLACK

Set-Top Box

 

GREEN

 

 

 

 

 

 

Recorder

 

 

 

GREEN

3

Setup the Anynet function on the TV supporting Anynet, and enjoy the Anynet feature.

Note

-Anynet operation is only available for TV sets that support Anynet.

-If Component (Progressive) or S-Video connection was used, some features of Anynet will not be available. Use Video/Audio cable for the connection.

-Anynet function will not operate when Input and Output terminals are connected wrongly, because the TV cannot communicate with external devices.

-Anynet terminals are consisted of Input (Green) and Output (Black) terminals.

-Match the color-coded cables to terminals when you connect the Anynet cable.

RED WHITE

2-Channel stereo amp

4

Press the input select button of the Amplifier to select external input in order to hear sound from the DVD player.

Refer to your Amplifier's user manual to set the Amplifier's audio input.

Note

-Please turn the volume down when you turn on the Amplifier.

Sudden loud sound may cause damage to the speakers and your ears.

-Please set the audio in the menu screen according to the Amplifier. (See pages 62 to 63)

-The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of the Amplifier.

ENG-18

ENG-19