Samsung DVD-HR725/XEF, DVD-HR725P Plug & Auto Setup, Select Country using the …† œ √ buttons to

Plug & Auto Setup

Your HDD & DVD RECORDER will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes. Your HDD & DVD RECORDER will then be ready for use.

	1	Connect the RF cable as indicated on page 19.
		(Connecting Your HDD & DVD RECORDER to the
		TV Using the RF Cable and scart cable.)
		To use HDMI cable, make the Audio/Video
		connection before plugging in the power cord or
Setup		after finishing the “plug & autosetup.” Do not
		connect the HDMI cable while the “plug &
		autosetup” is progressing.
ystemS
	2	Plug the HDD & DVD RECORDER into the mains.
		“AUTO” in the front panel display flickers.

3 Press a number button to select the language.

Press 1 for English

Touche 2 pour Français

Drücken Sie 3 Für Deutsch

Pulse 4 para Español

Premere 5 per Italiano

Druk op 6 voor Nederlands

4 Press the OK button to start the auto setup.

Auto setup will be started.

Check antenna and TV cable connection.

Yes No

Select “Country” using the…† œ √ buttons to
5 select your country.
	Country Selection
		A	NL	S	PL
		B	I	CH	CZ
		DK	N	TR	Others
		FIN	P	GR
		D	E	HU

• Refer to following abbreviation table when selecting “Country”.

A(Austria)	NL(Netherlands)	S(Sweden)	PL(Poland)
B(Belgium)	I(Italy)	CH(Swiss)	CZ (Czech)
DK(Denmark)	N(Norway)	TR(Turkey)	Others
FIN(Finland)	P(Portugal)	GR(Greece)
D(Deutschland)	E(Spain)	HU(Hungary)

•The HDD & DVD RECORDER searches for the stations according to a preset preference list corresponding to the country that you have selected.

6 Auto channel scan will be started.

Channel Scan

Scanning...

10%

•The number of stations automatically stored by the HDD & DVD RECORDER depends on the number of stations that it has found.

7 After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. If you do not want to do auto clock setting, press CANCEL or MENU button.

Auto channel scan completed successfully.

Press the [OK] button to auto clock set.

Yes No

26 - English