Samsung DVD-HR725/XEF, DVD-HR725P manual Copying from a Camcorder

Copying from a Camcorder

You may control the Camcorder using the IEEE1394 (DV) interface.

1	Connect the DV output jack of your camcorder to the
	DV input jack on the front of your HDD & DVD
	RECORDER using a DV cable.
2	Press the HDD or DVD button.
	If you select DVD, Press the OPEN/CLOSE button and
	place a recordable disc on the disc tray. Press the
	OPEN/CLOSE button to close the disc tray. Wait until
	LOAD disappears from the front panel display.
3	Press the REC MODE button repeatedly to select
	the recording speed(quality).
		➞ SP ➞ LP ➞ EP ➞ XP
Recording
			Record Mode	SP 031:39

4	Press the INPUT button to select DV.
	If the input is set to DV, a playback/record menu that

enables camcorder control appears on the top of the screen.

DV

The DV device is connected.

MOVE SELECT RETURN

	Select the Play (√) icon on the upper part of the
5 screen to playback the camcorder and find the
	starting position to copy.
	You can press the PLAY ( ) button of the remote
	control to play the camcorder.
6	To start recording, use the œ √ buttons to select
	Record ( ● ) icon in the top side of the screen, then

press the OK button.

You can press the REC button of the remote control to start recording. To display playback related icons on the screen, press any direction button on the remote control.

- To stop recording -

Press the STOP ( ) button to stop or finish a recording in progress.

•When using DVD-RAM/-RW/-R discs, the message “Updating the information of disc. Please wait for a moment” is displayed

82 - English