Digital Output
1.PCM : Select this when you have no equipment that can decode Dolby Digital (or
2.Bitstream : Output Dolby Digital (or
■Digital output setting is equally applied to both Dolby Digital and
NOTE | LPCM sound track is always outputted as |
| |
| PCM. It has no relation with Digital |
| Output setting. |
■Be sure to select the correct Digital Output or you will hear no sound or loud noise.
DTS
1.Off : Doesn’t output DTS signal. Select this when your AV receiver or AV amplifier does not have DTS decoder.
2.On : Outputs DTS Bitstream via digital output when you play DTS track. Select this only when your AV receiver (or AV amplifier) have DTS decoder.
■When DTS soundtrack is played, sound
does not output from AV Audio Output.
NOTE
V-Mode Compatibility
This feature is about the setup for selecting audios when recording the NICAM STEREO
1.Off : Both “DUAL L” and “DUAL R” of the multi- audio broadcasting are recorded on HDD.Titles recorded on HDD under such setup status cannot be copied to V mode
2.On : Either “DUAL L” or “DUAL R” of the multi- audio broadcasting is recorded on HDD.Titles recorded on HDD under such setup status can be copied to
Audio
HDD
| Title | Digital Output |
| : PCM | √ | |
| Music | DTS |
| : Off | √ | |
| Dynamic Compression | : On | √ | |||
|
| |||||
| Photo |
|
|
| ||
|
|
| On |
|
|
|
| Programme |
|
|
|
|
|
| Setup |
|
|
|
|
|
|
|
|
|
|
| |
| MOVE | SELECT | RETURN | EXIT | ||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
|
|
| Audio | ||
| HDD |
|
|
|
|
|
| Title | Digital Output |
| : PCM | √ | |
| Music | DTS |
| : Off | √ | |
| Dynamic Compression | : On | √ | |||
|
| |||||
| Photo | : On | √ | |||
| Audio Selection |
| : DUAL L √ | |||
|
|
|
|
|
|
|
Programme
Setup
MOVE SELECT RETURN EXIT
Setup ystemS
Dynamic Compression
This is only active when a Dolby Digital signal is detected.
1.On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make
2.Off : You can enjoy the movie with the standard Dynamic Range.
English - 39