Samsung DVD-HR738 instruction manual Plug & Auto Setup

Plug & Auto Setup

Your HDD & DVD RECORDER will automatically set itself up when it is plugged in for the first time. TV stations and clock will be stored in memory. The process takes a few minutes.

Your HDD & DVD RECORDER will then be ready for use.

1		Connect the RF cable as indicated on page 19.
		(Connecting Your HDD & DVD RECORDER to the
		TV Using the RF Cable and scart cable.)
		(HR738 Only)
Setup		To use HDMI cable, make the Audio/Video
		Do not connect the HDMI cable while the
		connection before plugging in the power cord or
ystemS		after finishing the “Plug & Auto Setup.”
		Plug the HDD & DVD RECORDER into the mains.
		“Plug & Auto Setup” is progressing.
	2	“AUTO” in the front panel display flickers.

4 Auto channel scan will be started.

Auto Setup

Please wait.

68%

5 After auto channel scan is completed, auto clock setting will be started automatically in 10 seconds. If you want to start auto clock setting immediately, press OK button. If you do not want to do auto clock setting, press CANCEL or MENU button.

Auto channel scan completed successfully.

Press the [OK] button to auto clock set.

Yes No

6 Wait until current date and time are displayed automatically. If you want to exit auto clock setting, press MENU button.

3 Press the OK button to start the auto setup.

Auto setup will be started.

Please wait. Now setting the clock. If you want to exit clock setting, press the [MENU] button.

Yes No

28 - English