Samsung DVD-HR738 instruction manual Case 2 Connecting to a TV with DVI Jack

Case 2 : Connecting to a TV with

DVI Jack

< DVD-HR738 >

•Using the DVI Adapter Cable(not supplied),

connect the HDMI OUT jack on the rear of the HDD & DVD RECORDER to the DVI IN jack of your TV.

onnecting & Setting Up

•Using the audio cables, connect the AUDIO

(red and white) OUT jacks on the rear of the HDD & DVD RECORDER to the AUDIO (red and white) IN jacks of your TV. Turn on the HDD & DVD RECORDER and TV.

•Press the input selector on your TV remote control until the DVI signal from the HDD & DVD RECORDER appears on your TV screen.

red white

white

red

■ To use HDMI cable, make the Audio/Video

C

CAUTION

connection before plugging in the power cord or after finishing the “Plug & Auto Setup.” Do not connect the HDMI cable while the “Plug & Auto Setup” is progressing.

■Progressive scan automatically activates when HDMI is connected.

■	If your TV does not have Bitstream decoder,		■	HDMI (High Definition Multimedia
	you must set the digital audio output to PCM in
		NOTE		Interface)
	order to watch through the HDMI output.
				HDMI is an interface to enable the digital
	(See pages 38~39)
				transmission of video and audio data with
■	Depending on the HDMI device (TV/HDMI			just a single connector. Since HDMI is
	Receiver) you use, audio may not be			based on DVI, it is completely compatible
	supported. If TV/HDMI Receiver does not			with DVI. The only difference between
	support Dolby digital, Audio output is not			HDMI and DVI is that HDMI supports
	available when you set Digital output as			multi-channel audio.
	'Bitstream' in Audio setup menu. In this case,			Using HDMI, the HDD & DVD
	set the digital audio output to PCM. If TV/HDMI			RECORDER transmits a digital video and
	Receiver does not support DTS, Audio output			audio signal and displays a vivid picture
	is not available when you play disc in DTS			on a TV having an HDMI input jack.
	format.		■	HDMI connection description
■	You can switch from the HDMI output to other			HDMI connector - Both uncompressed
	output only in stop mode.
				video data and digital audio data
				(LPCM or Bit Stream data).
				- Though the HDD & DVD RECORDER
				uses a HDMI cable, the HDD & DVD
				RECORDER outputs only a pure digital
				signal to the TV.
				- If TV does not support HDCP
				(High -bandwidth Digital Content
				Protection), snow noise appears on the
				screen.

24 - English