Samsung DVD-HR750/XEG, DVD-HR750/XEB manual Other type of connecting the Audio Output cable

Case 3 : Component Video output jacks

1.Connect Component video cables(not supplied) between the COMPONENT OUT(Y, PB, PR) jacks on HDD & DVD RECORDER and COMPONENT IN(Y, PB, PR) jacks on your TV.

•You will enjoy high quality and accurate colour reproduction images.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier).

(See pages 21~22).

3.After connecting, refer to the pages 33~34.

Red	Blue	Green
Green
Blue
Red

M Make sure that the colour coded connections match. The Y, PB, PR component output jacks of your HDD & DVD RECORDER must be connected to the exact corresponding component input jacks on your TV.

Progressive setting is only available when the Video Out is set to Component.

(See pages 33~34)

Other type of connecting the Audio

output cable

There are several ways to output audio signal not using scart cables. Select the audio connection that best suits you below.

•Case 1 : Connecting to your TV

•Case 2 : Connecting to a stereo amplifier with AV output jacks

•Case 3 : Connecting to an AV amplifier with a digital output jack

Manufactured under licence from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

“DTS” and “DTS Digital Out” are trademarks of DTS, Inc.

Case 1 : Connecting to your TV

If your TV has audio input jacks, use this connection.

Yellow	Red	White	Yellow
White
Red

Connecting & Setting Up

English - 21