Samsung DVD-HR750/XEH manual Cd-R/-Rw, DVD-R Disc Playback and Recording

◆CD-R/-RW

•Use a 700MB (80 minutes) CD-R/-RW disc. If possible, do not use a 800MB (90 minutes) or above disc, as the disc may not play back.

•If the CD-R/-RW disc was not recorded as a closed session, you may experience a delay in the early playback time, all recorded files may not play.

•Some CD-R/-RW discs may not be playable with this unit, depending on the device which was used to burn them. For contents recorded on CD-R/-RW media from CDs for your personal use, playability may vary depending on contents and discs.

◆DVD-R Disc Playback and Recording

•Once a DVD-R recorded in Video Mode is finalised, it becomes DVD-Video.

•You can record onto the available space on the disc and perform editing functions such as giving titles to discs and programmes and erasing programmes before finalising.

•When programming is erased from a DVD-R, that space does not become available. Once an area on a DVD-R is recorded on, that area is no longer available for recording, whether the recording is erased or not.

•It takes about 30 seconds for the unit to complete recording management information after recording finishes.

•This product optimizes the DVD-R for each recording. Optimizing is carried out when you start recording after inserting the disc or turning on the unit. Recording onto the disc may become impossible if optimizing is carried out too many times.

•Playback may be impossible in some cases due to the condition of recording.

•This unit can play back DVD-R discs recorded and

finalised with a Samsung DVD video recorder. It may not be able to play some DVD-R discs depending on the disc and the condition of the recording.

◆DVD-RW Disc Playback and Recording

•Recording and playback can be performed on DVD-RW discs in both the Video and VR Modes.

•Once a DVD-RW recorded in both the Video and VR Modes is finalised, you cannot perform additional recording.

•Once a DVD-RW recorded in Video Mode is finalised, it becomes DVD-Video.

•In both modes, playback can be performed before and after finalisation, but additional recording, deleting and editing can not be performed after finalisation.

•If you want to record the disc in VR Mode and then record in V Mode, be sure to execute Format. Be careful when executing Format because all the recorded data may be lost.

•A DVD-RW blank disc is initialized to VR Mode when first initialized.

◆DVD-RAM Disc Playback and Recording

•Ensure that the recording mode is set to VR mode. Otherwise, this product will not be able to play the recording.

•You cannot play a DVD-RAM in most DVD components due to compatibility issues.

•Only DVD-RAM standard Version 2.0. discs can be played in this unit.

•DVD-RAM recorded on this unit may not work with other DVD components. To determine compatibility with these DVD-RAM discs, refer to the user’s manual for the player.

•For cartridge type DVD-RAM discs, remove the cartridge and use the disc only.

Getting Started

English - 5