Samsung DVD-HR750/XEH Available Video Output Jack, Setting up the Progressive scan, Component

HDD & DVD RECORDER			Video
HDD
	TV Aspect		: 4:3 Letter Box
Library
Timer Record	3D Noise Reduction		: Off
	Video Output	Component: Component
Disc Manager
		RGB
Setup

mMOVE sSELECT rRETURN eEXIT

Video Output

You can enjoy high quality image through RGB or Component video connections. RGB video output is available connecting scart jack(AV1) and component video output is available connecting component(Y, PB, PR) jack. Only one of these signals can be selected at one time.

•Component

•RGB

In Component mode, you can set video output to Progressive (P.SCAN) or Interlace, see pages 33 to 34.

Available video output jacks are as follow.

Available Video Output Jack

	Setting mode	Component mode		RGB Mode
Output jack		P.SCAN off mode (Interlace mode) P.SCAN on mode			System
Component Output				°
(Y, PB, PR)			(TV in progressive mode)
					Setup
AV1	R, G, B	°	°
Scart	Composite		°	°
Composite Video out			°
S-Video out			°

Progressive scan

If your TV supports Progressive Scan, press the P.SCAN button on the front of the HDD & DVD RECORDER.

To view ‘Progressive scan mode’, first connect the component cable. (See page 21)

Be sure the Component cables are connected properly.

Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].

Yes No

◆Setting up the Progressive scan

1.With the unit in Stop mode, press the P.SCAN button on the front of the HDD & DVD RECORDER.

The message “Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].” will appear.

2.Press the ◄► buttons to select Yes, and then press the OK button.

3.Set your TV to Progressive input (using the TV remote control.)

M If the P.SCAN button on the HDD & DVD RECORDER’s front panel is pressed during playback, the message “This function is possible only on stop mode” appears on the screen.

Progressive setting is only available when the HDD & DVD RECORDER is in stop mode.

English - 33