Samsung DVD-HR750/XEH manual Video, Sound, Remote Control Unit, Other, Timer Recording

Video

The disc revolves, but no image or bad quality images is displayed.

Checkpoint 1	Be sure that the Video Setting is
	properly set. (See pages 32~34)
Checkpoint 2	Check whether there is damage to or any
	foreign material on your disc.
Checkpoint 3	Some low quality discs may not play properly.
Checkpoint 4	If scenes change from dark to bright
	suddenly, the screen may shake
	vertically temporarily, but this is not a fault.

Sound

No sound.

Checkpoint 1	Are you watching a programme in slow or skip
	mode?
	If you are playing a programme at a speed
	other than normal speed, sound will not be
	heard. (Except for forward search (X 2) in
	disc.)
Checkpoint 2	Check the connections and settings. (See
	pages 21~22, 30~31)
Checkpoint 3	Check whether the disc is damaged. Clean
	the disc, if necessary.
Checkpoint 4	Check whether the disc is inserted
	correctly with the label facing up.
No audio output.
Checkpoint 1	Check whether you have selected the correct
	digital output options in the Audio Output

Options menu. (See pages 30~31)

Timer recording does not work properly.

Checkpoint 1	Re-check the recording time and the end time
	settings again.
Checkpoint 2	Recording will be cancelled if the power is
	interrupted due to a power failure or another
	similar reason while recording.

Remote Control Unit

The remote control doesn’t work.

Checkpoint 1	Point the remote control at the remote control
	sensor on your HDD & DVD RECORDER.
	Allow for proper distance. Remove obstacles
	between your HDD & DVD RECORDER and
	the remote control.
Checkpoint 2	Check whether the batteries are drained.
Checkpoint 3	Check the TV/DVD selection button setting.
Checkpoint 4	Check whether TV control button is selected
	or not.

Other

I forgot my password for parental supervision.

Checkpoint 1 Press and hold the PROG () buttons on the front panel of the Recorder for more than 5 seconds with no disc in the unit. All settings including the password will revert to the factory settings. Do not use this unless absolutely necessary.

(Note that this function is possible only when no disc is inserted.)

Is it possible to change a subtitle and an audio signal on a recorded disc?

Checkpoint 1	A recorded disc is played with only the subtitle
	and the audio signal which were selected
	during recording.

Timer Recording

Timer lamp flickers.

Checkpoint 1	Check there is enough space in the disc or
	HDD for recording.
Checkpoint 2	Check whether the current disc is recordable
	or not.
	Make sure to check before the start time of
	recording.

Other problems.

Checkpoint 1	Read the table of contents and then find and
	read the section describing your problem,
	follow the instructions given.
Checkpoint 2	Plug your HDD &DVD RECORDER off and
	on.
Checkpoint 3	If the problem still persists, contact a nearby
	Samsung service centre.

Reference

English - 97