Samsung DVD-HR757/XEH Available Video Output Jack, Setting up the Progressive scan, Setup

HDD & DVD RECORDER						Video
HDD
	Library	TV Aspect			: 4:3 Letter Box
		3D Noise Reduction			: Off
Timer Record
		HDMI Resolution			: 576P
Disc Manager
		Video Output		Component
	Setup			RGB
mMOVE	sSELECT		rRETURN			eEXIT

Video Output

You can enjoy high quality image through RGB or Component video connections. RGB video output is available connecting scart jack(AV1) and component video output is available connecting component(Y, PB, PR) jack. Only one of these signals can be selected at one time.

•Component

•RGB

In Component mode, you can set video output to Progressive (P.SCAN) or Interlace, see pages 37 to 38.

When the HDMI cable (not supplied) is not connected, available video output jacks are as follow.

Available Video Output Jack

	Setting mode	Component mode		RGB Mode	System
Output jack		P.SCAN off mode (Interlace mode) P.SCAN on mode
Component Output				°
					Setup
(Y, PB, PR)			(TV in progressive mode)
AV1	R, G, B	°	°
Scart	Composite		°	°
Composite Video out			°
S-Video out			°

M When the HDMI cable(not supplied) is connected, RGB output does not operate. Video output is set to Component.

Progressive scan

If your TV supports Progressive Scan, press the P.SCAN button on the front of the HDD & DVD RECORDER.

To view ‘Progressive scan mode’, first connect the component cable. (See page 21)

Be sure the Component cables are connected properly.

Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].

Yes No

◆Setting up the Progressive scan

1.With the unit in Stop mode, press the P.SCAN button on the front of the HDD & DVD RECORDER.

The message “Press [Yes] to confirm Progressive scan mode. Otherwise, press [No].” will appear.

2.Press the ◄► buttons to select Yes, and then press the OK button.

3.Set your TV to Progressive input (using the TV remote control.)

English - 37