PROBLEM

EXPLANATION/SOLUTION

 

 

No audio output.

Check whether you have selected the correct digital output options in the Audio

 

Output Options menu. (See pages 40~41)

 

 

Timer lamp flickers

• Check there is enough space in the disc or HDD for recording.

 

• Check whether the current disc is recordable or not.

 

Make sure to check before the start time of recording.

 

 

Timer recording does not work properly.

• Re-check the recording time and the end time settings again.

 

• Recording will be cancelled if the power is interrupted due to a power failure

 

or another similar reason while recording.

 

 

Cannot copy into USB or vice-versa

• Check the USB connection.Disconnect and try to connect again.

 

• Refer to “Compatible USB devices at host port”on page 8.

 

 

No HDMI output

• Check the Video output is HDMI enabled.

 

• Check the connection between the TV and the HDMI jack of the HDD & DVD

 

RECORDER.

 

• See if your TV supports HDMI.

 

 

Abnormal HDMI output screen.

If snow noise appears on the screen, it means that TV does not support HDCP

 

(High-bandwidth Digital Content Protection).

 

 

HDMI output Jitter.

• Check your TV system setup correctly.

 

• Please refer to the user’s manual of your TV.

 

 

The remote control doesn’t work.

• Point the remote control at the remote control sensor on your HDD & DVD

 

RECORDER. Allow for proper distance. Remove obstacles between your HDD

 

& DVD RECORDER and the remote control.

 

• Check whether the batteries are drained.

 

• Check the TV/DVD selection button setting.

 

• Check whether TV control button is selected or not.

 

 

I forgot my password for parental

Press and hold the PLAY/PAUSE (&) buttons on the front panel for more than

supervision

10 seconds with no disc in the unit.

 

All settings including the password will revert to the factory settings. Do not use

 

this unless absolutely necessary.

 

 

Is it possible to change a subtitle and an

A recorded disc is played with only the subtitle and the audio signal which were

audio signal on a recorded disc?

selected during recording

 

 

Other problems

• Read the table of contents and then find and read the section describing your

 

problem, follow the instructions given.

 

• Plug your HDD & DVD RECORDER off and on.

 

• If the problem still persists, contact a nearby Samsung service centre.

 

 

REFERENCE

English _101