OTHER TYPE OF CONNECTING THE VIDEO OUTPUT CABLE

There are several ways to output a video signal not using scart cables. Select one of the following video connections that best suits.

•Case 1 : Connecting to a Video (Composite) output jack

•Case 2 : Component Video output jacks

Component video and Progressive Output Modes

•Component video output is available only if your TV supports Component video input, respectively.

If Component video output does not work, check the TV connections and the TV input selection settings.

•Compared to standard interlaced video, progressive scan doubles the amount of video lines fed to your TV, resulting in a more stable, flicker-free, clear image than interlaced video. This is only available with TVs that support progressive scan.

•Progressive Scan Output (576P)

Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture, in case of 576 progressive scan picture problems, It is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding our TV set compatibility with this model 576P HDD & DVD RECORDER, please contact our customer service centre.

Case 1 : Connecting to a Video (Composite) output jack

1.Connect a video (Yellow) cable between the VIDEO (yellow) OUT jack on HDD & DVD RECORDER and VIDEO (yellow) INPUT jack on your TV (or AV amplifier).

•You will enjoy regular quality images.

2.Connect audio cables (white and red) between the AUDIO OUT jacks on the HDD & DVD RECORDER and AUDIO IN jacks on TV (or AV amplifier). (See pages 27~29)

Video/Audio Cable

UP SETTING & CONNECTING

Yellow Red White

English _25