Method 3 : Antenna + DVD Recorder + external decoder box + TV

If you connect external decoder box to DVD recorder, you can record scrambled channels received through the built-in TV tuner in DVD Recorder.

1

3

4

2

1.Connect RF antenna cables as shown.

2.Connect the AV1 connector on this recorder to the SCART AV connector on TV using a SCART cable.

3.Connect the AV2 connector to a SCART AV connector on decoder box.

4.Set channel decoding function on using on-screen menu. Refer to page 27.

Step3 : Other type of connecting the Video output cable

There are several ways to output video signal not using scart cables. Select one of the following video connecting that best suits you below.

Method 1 : Connecting to a Composite Video output jack

Method 2 : Connecting to an S-video output jack

S-Video Output Modes

S-Video output are available only if your TV supports S-Video input. If S-Video output does not work, check the TV connections and the TV input selection settings. (For information on how to connect to a TV, see pages 15 to 16.)

Method 1 : Connecting to a Composite Video output jack

Connect a video(yellow) cable between the VIDEO (yellow) OUT jack on DVD Recorder and VIDEO

(yellow) IN jack on the TV (or AV amplifier).

You will enjoy regular quality images.

Connect audio cables( white and red) between the ANALOG AUDIO OUT jacks on the DVD Recorder and AUDIO IN jacks on TV( or AV amplifier).

(See page 18)

Connecting & Setting UP

English -17

Page 18
Image 18
Samsung DVD-R100E/EUR manual Other type of connecting the Video output cable, Video Output Modes