English -
17
4. The message “Please set your TV to Progressive input,
To deactivate, press [STOP] key.” will appear.
Press the ENTER button.
5. The message “Video Output Mode Progressive Scan”
will appear.
You will enjoy high quality accurate color reproduction
images. Component video separates the picture
element into black and White(Y), blue(PB), red(PR)
signals to present most clear and clean images.
Connect audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV(or AV amplifier).
(See pages 18 to 19)
Method 2 : Connecting to an S-Video input jack
Connect an S-Video cable(not supplied) between the S-
VIDEO OUT jack on DVD Recorder and S-VIDEO IN
jack on your TV (or AV amplifier).
You will enjoy high quality images. S-Video separates
the picture element into black and white (Y) and color
(C) signals to present clearer images than regular
video input mode.
Connect audio cables(white and red) between the
AUDIO OUT jacks on the DVD Recorder and AUDIO
IN jacks on TV(or AV amplifier).
(See pages 18 to 19)
Method 3 : Connecting toComponent video inputjacks(Y,PB,PR)
1. Connect Component video cables(not supplied)
between the COMPONENT OUT(Y,PB,PR) jacks on
DVD Recorder and COMPONENT IN(Y,PB,PR) jacks
on your TV (or AV amplifier).
2. If the TV connected supports Progressive Scan, press
the P.SCAN button on the front of the DVD Recorder
to enjoy higher quality video.
3. The message “Please [Yes] to confirm Progressive scan
mode. Otherwise press [No]” will appear.
Press the œ √ buttons to select Yes, and then press
the ENTER button.
COMPONENT
Pr
Pb
Y
2
1
Make sure that the color coded
connections match. The Y, PB, PR
component output jacks of your DVD
Recorder must be connected to the exact
corresponding component input jacks on
your TV.
NOTE
Connecting & Setting UP
2_AK68-00683A-0314~29) 2/17/05 10:11 AM Page 17