Samsung DVD-R120 Then press the Enter or √ button, Digital Output, Dynamic Compression

Connecting & Setting UP

4 Select the sub menu(Digital Output, DTS or Dynamic Compression) using the …† buttons, then press the ENTER or √ button.

Select the item that matches the audio connection you selected on pages 18~19(Method 1, 2 and 3).

No Disc			Audio
Timer Rec.	Digital Output	: PCM	√
Setup	DTS	: Off	√
	Dynamic Compression : On		√
MOVE	SELECT	RETURN	EXIT

Digital Output

●PCM : Converts to PCM(2CH) 48kHz audio.

Select PCM if your amplifier system is stereo and/or Dolby Prologic.

●Bitstream : Outputs bitstream (original format) such as Dolby or DTS.

Select bitstream if your amplifier system has multi channel digital audio surround decoding (Dolby Digital and/or DTS).

No Disc			Audio
Timer Rec.	Digital Output	PCM
Setup	DTS	Bitstream
	Dynamic Compression	: On	√

MOVE SELECT RETURN EXIT

DTS

●Off : Doesn’t output DTS bitstream (original format).

●On : Outputs DTS bitstream. (via Digital output) Select DTS when connecting to a digital amp with DTS decoder.

●When DTS soundtrack is played, sound is not output from Analog Audio Output.

No Disc			Audio
Timer Rec.	Digital Output	: PCM	√
Setup	DTS	Off
	Dynamic Compression On
MOVE	SELECT	RETURN	EXIT

Dynamic Compression

This is only active when a Dolby Digital signal is detected.

●On : When Movie soundtracks are played at low volume or from smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

●Off : You can enjoy the movie with standard Dynamic Range.

No Disc			Audio
Timer Rec.	Digital Output	: PCM	√
Setup	DTS	: Off	√
	Dynamic Compression Off
		On
MOVE	SELECT	RETURN	EXIT

5 Use the …† buttons to select the desired item(PCM, Bitstream, DTS-Off, DTS-On, Dynamic Compression-Off or Dynamic Compression-On).

Then press the ENTER or √ button.

■ Press the RETURN or œ button to return to the previous menu.

NOTE Press the MENU button to exit the menu.

28- English