Samsung DVD-R120 instruction manual Setting a Timer Recording, Press the Menu button in stop mode

Setting a Timer Recording

You need to set clock (Initial Setup – Clock Set) before proceeding with a timer recording. (See page 23)

1 Press the OPEN/CLOSE button, and place a recordable disc on the disc tray.

2 Press the OPEN/CLOSE button to close the disc tray.

Wait until “LOAD” disappears from the front panel display.

If an unused DVD-RAM disc is used, whether to format or not will be asked first. (See page 31)

If an unused DVD-RW disc is used, whether to initialize or not will be asked first. (See page 31)

3 Press the MENU button in stop mode.

You can also set a timer recording via the TIMER button.

4 Press the …† buttons to select Timer Rec., and then press the ENTER or √ button.

DVD-RAM(VR)		Timer Record
Title List	Timer Record		√
Playlist	Scheduled Record List		√
Disc manager
Timer Rec.
Setup
MOVE	SELECT	RETURN	EXIT

5 Press the …† buttons to select Timer Record, and then press the ENTER or √ button.

The Timer Record Input items are displayed.

DVD-RAM(VR)						Scheduled Record List
						Recordable Time 02:12 SP
	No. Source				Date	Start	End		Mode Edit
					No. 01
		Source	Date		Start		End	Mode
		CH 09	01/	01	12 : 00	AM 02 :	00 AM	S	P
		Recordable		Time 02:12 SP
MOVE				SELECT		RETURN			EXIT

6 Fill in the items using the …†œ √ buttons. œ √ : Moves to the previous/next item,

…† 0~9 : Sets a value.

●Source: The video input source (L1, L2 or DV), or the broadcasting channel you want to make a timer recording of. When selecting channels to be recorded, the …† buttons on the remote control can let you select only the channels that have been memorized during Auto Scan. For the selection of other channels, use the number buttons.

●Date: Date that the timer recording starts

01/01	Every Day
01/02	MON-SAT
...	MON-FRI
01/30	Every SAT
01/31	...
	Every SUN

●Start/End Time: Start and end time of the timer recording

●Mode (Recording mode)

XP (High quality): Approx. 1 hour

SP (Standard quality): Approx. 2 hours

LP (Long recording): Approx. 4 hours

EP (Extended): Approx. 6 hours or 8 hours.

FR (Flexible Recording): See page 38.

■When you are recording at EP mode on a

DVD-RW(V)/R disc, it may not record the

NOTEfull 6 or 8 hours because the unit uses the VBR(Variable Bit Rate) ENCODING system. For example, if you record a program with a lot of action, it uses a higher bit rate which in turn consumes more disc memory.

7 Press the ENTER button.

DVD-RAM(VR)				Scheduled Record List
				Recordable Time 02:12 SP
	No.	Source	Date	Start	End	Mode	Edit
	01	CH 09	01/01	12:00 AM	02:00 AM	SP	√
	02	-- --	--/--	--:-- --	--:-- --	--	√
MOVE			SELECT	RETURN		EXIT

● ( ) and Timer Set will appear on the front panel display. This means that a timer recording is set.

●Recording is automatically performed when the set time is reached.

■ If you make a mistake

NOTE	Press the œ √ button to select the item
	you want to change.

■If the timer settings overlap

The programs are recorded in order of priority. If timer recording is set for the first program and then again for the second program and both programs overlap, the following message will appear on the screen: ‘This setting is identical with 1’ The message shows that the first program has priority.

After recording of the first program is complete, the second program starts being recorded.

■To exit without saving the current setting

Press the MENU or TIMER button.

■To return to the previous menu

Press the RETURN button if you don't

want to set a timer recording.

Recording

English -37