Samsung DVD-R120 2. Clock Set

English - 23
2. Clock Set
This menu is used to set the current time. You need to
set the time to use timer recording.
1
With the unit in Stop mode/No Disc mode,
press the MENU button.
2
Select Setup using the …† buttons, then
press the ENTER or √button.
3
Select System using the …† buttons, then
press the ENTER or √button.
System menu will be displayed.
RETURNSELECTMOVE EXIT
Timer Record
No Disc
Timer Record
√√
Scheduled Record List
√√
Timer Rec.
Setup
RETURNSELECTMOVE EXIT
Setup
No Disc
System
√√
Language
√√
Audio
√√
Video
√√
Parental Control
√√
Auto Clock Set
Connecting & Setting UP
4
Select Clock Set using the …† buttons, then
press the ENTER or √button.
Clock Set menu will be displayed.
If you have the Antenna connected via Method 1 or 3
on pages 15-16.
The DVD Recorder automatically sets the clock by
searching for a channel that carries a time signal and
sets your time zone and daylight saving(if applicable).
5
Select Auto Clock Set using the …† buttons,
then press the ENTER or √button.
6
Press the ENTER or √button.
Select On using the …† buttons, then press
the ENTER or √button.
RETURNSELECTMOVE EXIT
System
No Disc
Clock Set
√√
Channel Set
√√
CM Skip Time : 15 Sec
√√
EPMode Time : 6Hours
√√
Chapter Creator : Off
√√
RETURNSELECTMOVE EXIT
Clock Set
No Disc
Auto Clock Set
√√
Manual Clock Set
√√
Method 1 and 3
You must have the antenna connected to set the
Auto Clock. See pages 15~16 for Antenna
connections(Method 1, 2 and 3).
RETURNSELECTMOVE EXIT
Auto Clock Set
No Disc
Auto Clock Set : On
√√
Clock Data CH : Automatic
√√
Time Zone : Automatic
√√
Daylight Saving : Automatic
√√
Off
On
Timer Rec.
Setup
Timer Rec.
Setup
Timer Rec.
Setup
Timer Rec.
Setup
■
The Menus are slightly different
depending on whether a disc is inserted or
not. The menus described on the next few
pages are with no disc in the unit.
NOTE
2_AK68-00683A-0314~29) 2/17/05 10:11 AM Page 23