Record Mode

XP (01:11)

DV

 

 

The DV device is connected

 

MOVE

SELECT

RETURN

Copying from a Camcorder

You may control a Digital Camcorder using the IEEE1394 (DV) interface.

Before you start

Check that the disc has enough available space for the recording. Adjust the record mode. See page 24 to see how to connect the camcorder to your DVD recorder.

1.Press the OPEN/CLOSE button, and place a recordable disc on the disc tray.

2.Press the OPEN/CLOSE button to close the disc tray. Wait until “LOAD” disappears from the front panel display.

3.Press the REC MODE button repeatedly to select the recording

speed(quality).

SP LP EP XP

4.Press the INPUT SEL. button to select DV.

If the input is set to DV, a playback/record menu that enables control of the digital camcorder appears on the top of the screen.

5.Select the PLAY ( ) icon on the upper part of the screen to playback the camcorder and find the starting position to copy.

6.To start recording, select REC( ) icon in the top side of the screen using the ◄ ► buttons, then press the ENTER button.

To stop recording

Press the STOP ( ) button to stop or finish recording in progress.

When using DVD-RAM/DVD-RW/DVD-R discs, the message ‘Updating the information of disc. Please wait for a moment’ is displayed.

■ You can not change the record mode and input source while recording.

Recording will stop automatically if there is no free space left for recording.

Up to 99 titles can be recorded onto a DVD-RAM/-RW/-R disc.

DVD-RAM/DVD-RW discs must be formatted before starting to record.

Most new discs are sold unformatted.

Do not use DVD-R authoring discs with this unit.

To access on-screen controls during recording, press the ◄ or ► buttons.

When copying from a camcorder and the end of the tape is reached (no Video), the screen may turn blue or purple.

Recording

English - 39

Page 39
Image 39
Samsung DVD-R155 instruction manual Copying from a Camcorder, To stop recording