Samsung DVD-R155 instruction manual Quick Recording Setting, Using Anynet+HDMI-CEC, TV Menu

System Setup

DVD-Recorder			System
DVD-RW(VR)
Title List	CM Skip Time	: 15 Sec	►
Playlist	EP Mode Time	: 6 Hours	►
Disc Manager	Chapter Creator	: Off	►
Timer Rec.	Quick Recording	: Off	►
	Anynet+(HDMI-CEC) : On		►
Setup
MOVE	ENTER	RETURN	EXIT

DVD-RecorderSystem

No Disc
Timer Rec.	CM Skip Time	: 15 Sec	►
Setup	EP Mode Time	: 6 Hours	►
	Chapter Creator	: Off	►
	Quick Recording	: Off	►
	Anynet+(HDMI-CEC)	Off
		On

MOVE ENTER RETURN EXIT

DVDR

View TV

DVDR Menu

DVDR Operation

Receiver : Off

Setup

Move Enter Exit

TV Menu

▌Quick Recording Setting

It takes about 10 seconds for a disc to load (initialize) every time you turn on the unit. To bypass this initialization process, you can set the Quick Recording feature to On. This enables you to record immediately without having to wait for the disc to load.

1.With a disc inserted and the unit in Stop mode, press the MENU button on the remote control.

2.Select Setup using the ▲▼ buttons, then press the ENTER or ► button.

You can't use the Setup functions while playing a disc.

3.Select System using the ▲▼ buttons, then press the ENTER or ► button.

System menu will be displayed.

4.Select Quick Recording using the ▲▼ buttons, then press the ENTER or ► button.

Quick Recording menu will be displayed.

5.Select On using the ▲▼ buttons, then press the ENTER or ► button.

■ The Quick Recording is set to Off as default.

▌Anynet+(HDMI-CEC)

Anynet+ is a function that can be used to operate the recorder using a Samsung TV remote control, by connecting the DVD Recorder to a SAMSUNG TV using an HDMI Cable. (see page 15) (This is only available with SAMSUNG TVs that support Anynet+.)

1.With the unit in Stop mode/No Disc mode, press the MENU button on the remote control.

2.Select Setup using the ▲▼ buttons, then press the ENTER or ► button.

3.Select System using the ▲▼ buttons, then press the ENTER or ► button. The system menu will be displayed.

4.Select Anynet+(HDMI-CEC)using the ▲▼ buttons, then press the ENTER or ► button.

Anynet+(HDMI-CEC) items will be displayed.

5.Select On using the ▲▼ buttons, then press the ENTER or ► button.

Using Anynet+(HDMI-CEC)

1.Connect the recorder to a Samsung TV with an HDMI cable. (See page 15)

2. Set the Anynet+(HDMI-CEC) to “On” on your DVD Recorder. (see above)

3. Set the Anynet+ function on your TV.

(See the TV instruction manual for more information.)

• You can operate the DVD Recorder by using the TV remote control.

(Available TV buttons : , , , , and buttons, ~ button)

•When you press the Anynet+ button on the TV's remote control, the OSD to the left will appear.

-DVDR Operation : Same as ANYKEY button ( ) on the DVD Recorder remote control.

-DVDR Menu : Same as MENU button ( ) on the DVD Recorder remote control.

English - 28