Samsung DVD-SR270M/XEU manual Digital Manual Setup, Analogue Manual Setup, Analogue Channel List

Tuner Preset				12:00
Title List	Auto Preset
Timer	Digital Manual Setup
	Digital Channel	List
Edit	Digital Favorite Channel
Disc	Analog Manual Setup
Setting	Analog Channel List
Setup
>Move	sOk		rReturn	eExit
Manual Scanning
Country		:	United Kingdom
Channel type		:	Digital
Scan Mode		: ◄	All	►
Channel Number		: ◄	CH 5	►
Frequency		: ◄	178750kHz	►
Bandwidth		: ◄	8MHz	►
Signal status 0%
	Start		Cancel

Tuner Preset			12:00
Title List	Auto Preset
Timer	Digital Manual Setup
	Digital Channel List
Edit	Digital Favorite Channel
Disc	Analog Manual Setup
Setting	Analog Channel List
Setup
>Move	sOk	rReturn	eExit
	Manual Set
	Program	01
	Channel	---
	AFT	On
	Tuner Audio	NICAM
	Station Name	----
	>Move	sOk

Tuner Preset			12:00
Title List	Auto Preset
Timer	Digital Manual Setup
	Digital Channel	List
Edit	Digital Favorite Channel
Disc	Analog Manual Setup
Setting	Analog Channel List
Setup
>Move	sOk	rReturn	eExit
Channel List			12:00
Prog.	Ch	Name	▲
1	---	----
2	---	----
3	---	----
4	---	----
5	---	----
6	---	----
			▼
>Move	sSwap	Cancel	rReturn

Digital Manual Setup

To tune-in new channels, the DVD Recorder has been provided with the option Manual Scan where the channel data can be entered by user.

To setup, follow steps 1~3 on page 26.
4. Press the ▲▼ buttons to select Digital Manual Setup, then press OK
button.
5. Select the Channel Number which you want to find using ◄►
buttons.
Select Frequency and input the Frequency of the channel you want to
find by pressing the number button.
Select Bandwidth which you want to find using ◄► buttons.
When the valid frequency is input, the bandwidth is selected
automatically. You can select the value of 6,7 or 8 MHz. After select
option. Press OK button to start the scanning process.	System
Analogue Manual Setup	Setup
To setup, follow steps 1~3 on page 26

4.Press the ▲▼ buttons to select Analogue Manual Setup, then press OK button.

•Program : Press ▲▼ repeatedly to select the programme position (01 to 99) for the channel and press the OK button.

•Channel : Tune the channel using ▲▼ buttons.

•AFT : Fine tunes the channel to obtain a clearer picture. If the picture is not clear, select “Off” and press the OK button. When the fine tuning bar appears, press the ◄► buttons to obtain a clearer picture, then press the OK button.

•Tuner Audio : Sets the channels for the NICAM broadcast.

Normally, select "NICAM." If the sound from the NICAM broadcast is not clear, select "Standard" and then press the OK button.

•Station Name : Display station name automatically detected in broadcasting signal. If not detected, you can edit name by using ▲▼◄► buttons.

Analogue Channel List

You can swap or delete the desired channel in the channel list.

To setup, follow steps 1~3 on page 26.

4.Press the ▲▼ buttons to select Analogue Channel List, then press OK button.

•Swap : Select the channel you want to swap by pressing the ▲▼ buttons, then press the OK button.

Move the channel by press the ▲▼ buttons, then press the OK button.

•Delete : Select the channel you want to delete by pressing the ▲▼ buttons, then press the CANCEL button.

English - 27