Connecting & Setting Up
Connecting & Setting Up
Connecting DVD Recorder to the TV
using the RF Cable
M Make sure that both the television and the DVD Recorder are switched off before connecting the cables.
1.Remove the aerial or network input cable from the television.
2.Connect this cable to the 75Ω aerial jack marked on the rear of your DVD Recorder.
3.Plug the RF Cable supplied into the jack on your DVD Recorder.
4.Plug the other end of the RF Cable into the connector previously used for the aerial on the television.
M The RF cable connection of this product sends only signal of TV. You must connect SCART cable or Audio/Video cables to watch a signal from DVD Recorder.
To RF IN
To RF OUT
TV
RF Cable
ANT
Connecting the SCART Cable
Case 1 : Connecting DVD Recorder to the TV using the SCART Cable
You can connect your DVD Recorder to the television using the SCART cable if the appropriate input is available on the television. You thus:
•Obtain better quality sound and pictures.
•Simplify the setting up procedure of your DVD Recorder.
M Regardless of the type of connection chosen, you must always connect the RF Cable. Otherwise, no picture will be visible on the screen when the DVD Recorder is switched off.
Make sure that both the television and the DVD Recorder are switched off before connecting the cables.
1.Connect the Aerial Cable.
2.Connect one end of the SCART cable to the AV1 (TV) jack on the rear of the DVD Recorder.
3.Plug the other end into the appropriate connector on the television.
Aerial
SCART Cable
To ANT INPUT
TV
ANT
RF Cable
English - 18