Recording

Recording immediately

 

 

 

 

XCVKL

 

DVD

VRSPAV 1

 

 

 

 

 

-RW

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DVD-SR275M only

Before you start

1.Make sure antenna cable is connected.

2.Press the OPEN/CLOSE button and place a recordable disc on the disc tray.

3.Check the remaining time on the disc.

DVD-RAM/DVD±RW/+R discs should be formatted or initialised in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

4.Press the OPEN/CLOSE button to close the disc tray. Wait until LOAD disappears from the front panel display.

Recording the current programme you are watching

1.Press the PROG ( / ) buttons or number buttons to select the station you want to record.

2.Press the REC MODE button repeatedly, to select the recording Mode (quality).

➞HQ ➞ HSP ➞ SP ➞ LSP ➞ ESP ➞ LP ➞ EP ➞ SLP

3.Press the REC button.

Recording from external equipment you are watching

1.Power on your DVD Recorder and switch to AV mode by pressing the INPUT SEL. button on the remote control. The front panel display changes in the following sequence.

➞PR ➞ AV1 ➞ AV2 ➞ AV3 ➞ DV

2.Press the REC MODE button repeatedly to select the recording Mode (quality).

➞HQ ➞ HSP ➞ SP ➞ LSP ➞ ESP ➞ LP ➞ EP ➞ SLP

3.When your DVD Recorder is in the Stop mode, set the operation mode of your external devices to play mode.

4.Press the REC button on your DVD Recorder when the image from which you want to start recording is displayed.

To pause recording

Press the PAUSE() button to pause a recording in progress.

•Press the PAUSE() button again to resume recording.

English - 56