Samsung DVD-V3300 instruction manual Set Dynamic Compression, Set DTS

DTS

Dynamic Compression

Language	: English
Front Display	: Auto
Auto Power Off	: Off

If your A/V receiver is equipped with a DTS decoder, your DVD- VCR can output DTS digital sound, but you MUST enable this feature in the menu system.

NOTE: Select “On” ONLY if you have connected a DTS-equipped A/V receiver to the DIGITAL AUDIO OUT (optical or coaxial) on the DVD-VCR back panel.

1Open “MENU”

Press the MENU button while the DVD is in Stop mode.

2Select “DVD”

Use the UP/DOWN buttons to highlight “DVD ” then press the ENTER button.

Dynamic Compression restrains the dynamic range of sound, i.e. the difference between the loud and quiet passages of a DVD audio track.

1	Open “MENU”
	Press the MENU button while the DVD is in Stop mode.
2	Select “DVD”
	Use the UP/DOWN buttons to highlight “DVD ”
	then press the ENTER button.
3	Select “Audio”
	Highlight “Audio”, then press the ENTER button.
4	Set “Dynamic Compression”

Language	: English
Front Display	: Auto
Auto Power Off	: Off

3 Select “Audio ”

Highlight “Audio”, then press the ENTER button.

4 Set “DTS”

Highlight “DTS” then press the RIGHT button to select one of the following options:

• Off - To use your DVD/TV with an A/V receiver NOT equipped with a DTS decoder.

• On – To use your DVD/TV with an A/V receiver equipped with a DTS decoder.

Off

On

PCM Down Sampling : On

Highlight “Dynamic Compression”, then press the RIGHT button to

select one of the following options:

• On - This will compress the total dynamic range of the DVD

audio, making quiet passages in the audio signal louder and

loud passages softer.

• Off – This will preserve the original dynamic range.

PCM Down Sampling : On

Off On

28 29