Samsung DVD-V4700 Disc Menu Language, Subtitle Language, Digital Output, Audio Language

Disc Menu Language Audio Language

Subtitle Language Digital Output

To set the Disc Menu Language to your preferred language, follow these steps. If your preferred language is available on a DVD, your Disc Menu Language will automatically be set to the language you choose.

1Open “MENU”

Press the MENU button while the DVD is in Stop mode.

2Select “DVD”

Use the UP/DOWN buttons to highlight “DVD”, then press the ENTER button.

3Select “Language”

Move the selection bar to “Language” then press ENTER to select.

4Select “Disc Menu”

Highlight “Disc Menu”, then press the ENTER button.

5Set “Disc Menu Language” Preference Highlight your preferred language for disc menus, then press the ENTER button.

To set the Audio Language to your preferred language, follow these steps. If your preferred language is available on a DVD, your Audio Language will automatically be set to the language you choose.

1Open “MENU”

Press the MENU button while the DVD is in Stop mode.

2Select “DVD”

Use the UP/DOWN buttons to highlight “DVD” then press the ENTER button.

3Select “Language”

Move the selection bar to “Language” then press ENTER to select.

4Select “Audio”

Highlight “Audio,” then press the ENTER button.

5Set “Audio Language” Preference Highlight your preferred language for audio soundtracks, then press the ENTER button.

To set the Subtitle Language to your preferred language, follow these steps. If your preferred language is available on a DVD, your Subtitle Language will automatically be set to the language you choose.

1Open “MENU”

Press the MENU button while the DVD is in Stop mode.

2Select “DVD”

Use the UP/DOWN buttons to highlight “DVD” then press the ENTER button.

3Select “Language”

Move the selection bar to “Language” then press ENTER to select.

4Select “Subtitle”

Highlight “Subtitle”, then press the ENTER button.

5Set “Subtitle Language” Preference

Highlight your preferred language for subtitles, then press the ENTER button.

Subtitle Language

Automatic

Subtitle

If your A/V receiver is equipped with a Dolby Digital decoder, your DVD-VCR can output Dolby Digital 5.1 sound, but you MUST enable this feature in the menu system to prevent damage to your speakers.

NOTE: Select “Bitstream” ONLY if you have connected a Dolby Digital-equipped A/V receiver to the Digital Output (coaxial) on the DVD-VCR rear panel.

1Open “MENU”

Press the MENU button while the DVD is in Stop mode.

2Select “DVD”

Use the UP/DOWN buttons to highlight “DVD” then press the ENTER button.

3Select “Audio”

Highlight “Audio”, then press the ENTER button.

4Set “Digital Output”

Highlight “Digital Output” then press the RIGHT button to select one of the following options:

•PCM – To use your DVD/TV with an A/V receiver without a Dolby Digital decoder.

•Bitstream –To use your DVD/TV with an A/V receiver with a Dolby Digital decoder.

PCM

Bitstream

PCM Down Sampling : On

ENG-16 ENG-17