Starting the recording mode
■How to use the Program mode
Selecting the automatic mode will configure the camera with optimal settings
and you can manually configure various functions. 1. Select the Program mode by pressing the M
(Mode) button (p.26).
2. Point the camera towards the subject and compose the image by using the LCD monitor.
3. Press the shutter button to capture an image. ※ Refer to page
the Program mode menus.
■How to use the EPS mode
This mode will reduce the effect of camera shake and help you get a well- exposed image in dim conditions.
1. Select the EPS mode by pressing the M (Mode) button. (p.26)
2. Point the camera towards the subject and compose the image by using the LCD monitor.
3. Press the shutter button to capture an image.
[EPS mode]
●Things to watch out for using the EPS mode
1.The digital zoom will not operate in the EPS mode.
2.If the lighting condition is brighter than fluorescent lighting condition, the EPS will not activate.
3.If the lighting condition is darker than in fluorescent lighting condition, camera
shake warning indicator ( 
) will display. For best results only take pictures in situations where the camera shake warning indicator ( 
) is not displayed.
4.If the subject is moving, the captured image may be blurred.
5.Avoid moving the camera while the [Capturing!] message is displayed to achieve a better result.
6.As the EPS uses the camera's digital signal processor, it may take a little longer for the camera to process and save the images.
