Connecting to a Power Source
■Insert the battery as shown
-If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity (+ /
-When the battery chamber cover is opened, do not press the battery chamber cover by force. This may cause damage to the battery chamber cover.
■There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery
indicator
|
| Low battery | Low battery | Low battery | |
| The battery is | capacity | capacity | capacity | |
Battery status | (Prepare to | (Prepare to | (Prepare to | ||
fully charged | |||||
|
| recharge or use | recharge or use | recharge or use | |
|
| spare battery) | spare battery) | spare battery) |
Inserting the memory card
■Insert the memory card as shown.
-Turn off the camera’s power before inserting the memory card.
-Have the front of the memory card facing toward the back of the camera (LCD monitor) and the card pins toward the front of the camera (lens)
-Do not insert the memory card in the wrong way round. Doing so may damage the memory card slot.
《12》
