White balance
●Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM ( 
) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white.
2. OK button : selects previous custom white balance.
Shutter button : saves new custom white balance.
-The custom white balance value will be applied, starting with the next picture you take.
-The user configured white balance will be remain effective until it is overwritten.
Exposure compensation
■Exposure compensation : This camera automatically adjusts the exposure according to the ambient lighting conditions.
You can also select the exposure value by using the Fn button.
●Compensating Exposure
1. Press the Fn button, and then use the UP and |
| 6 |
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||||
DOWN buttons to select the exposure |
|
|
|
|
|
|
|
|
| |
compensation icon ( | ). |
|
|
|
|
|
|
|
|
|
The exposure compensation menu bar will |
|
|
|
|
|
|
|
|
| |
appear as shown. |
|
|
|
|
|
| EV |
|
|
|
|
|
|
|
|
| |||||
2. Use the LEFT and RIGHT buttons to set the |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| ||
desired exposure compensation factor. |
|
|
|
|
|
|
|
|
| |
3.Press the Fn button again. The value you set will be saved and the Exposure Compensation setup mode will close.
If you change the exposure value, the exposure indicator ( 
) will be displayed on the bottom of the LCD monitor.
※A negative exposure compensation value reduces the exposure.
Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
《37》
