Connecting to a Power Source

You should use the rechargeable battery SLB-10A supplied with the camera. Be sure to charge the battery before using the camera.

„ SLB-10A rechargeable battery Specification

Model

SLB-10A

Type

Lithium Ion

Capacity

1,050mAh

Voltage

3.7V

Charging time(When the camera is turned off)

Approx. 180 MIN

„Number of images and battery life : Using the SLB-10A

 

Still image

Movie

Battery life

 

Number of images

Recording time

 

 

 

 

 

Approx. 110 MIN

 

Approx. 220 shots

Approx. 120 MIN

 

 

 

 

 

Using the fully charged battery,

 

 

Auto mode, 8M image size

 

 

Fine image quality, Shot to shot

 

 

interval: 30Sec. Changing the

Using the fully charged

 

zoom position between the Wide

battery

Conditions

and the Tele after every shot.

640x480 image size

 

Using the flash on every second

30fps frame rate

 

shot. Using the camera for 5

 

 

minutes and then Powering it off

 

 

for 1 minute.

 

 

 

 

 

 

 

KThese figures are measured under Samsung’s standard conditions and shooting conditions and may vary depending on the user’s methods.

KThese figures are measured under OIS shooting condition.

Important information about battery usage.

ξWhen the camera is not used, turn off the camera power.

ξPlease remove the battery if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaking if kept inside the camera.

ξLow temperatures (below 0°C) can affect the performance of the battery and you may experience reduced battery life.

ξBatteries will usually recover at normal temperatures.

ξDuring extended use of the camera, the camera body may become warm. This is perfectly normal.

12

Page 13
Image 13
Samsung EC-M110ZSFB/RU, EC-M110ZSDB/E3, EC-M110ZSBB/FR, EC-M110ZSBB/IT manual Connecting to a Power Source, Still image Movie