Setting up the recording function using the camera buttons

The recording mode function can be set up by using the camera buttons.

POWER button

Used for turning the camera’s power on / off.

If there is no operation during the specified time, the camera’s power will be turned off automatically to save battery life.

Refer to page 76 for more information about the auto power off function.

SHUTTER button

Used for taking an image or recording voice in the RECORDING mode.

ξIn MOVIE mode

Pressing the shutter button down fully

starts the process for recording a movie. Press the shutter button once and the movie is recorded for as long as the available recording time in the memory allows. If you wish to stop recording, press the shutter button again.

ξIn STILL IMAGE mode

Pressing the shutter button down halfway activates the autofocus and checks the condition of the flash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has finished storing the image data for 10 seconds.

ZOOM W / T button

If the menu is not displayed, this button works as the OPTICAL ZOOM or DIGITAL ZOOM button. This camera has a 3X optical zoom and a 3X digital zoom function.

Using both will offer a total zoom ratio of 9X.

„TELE Zoom

Optical zoom TELE : Pressing the ZOOM T button. This will zoom into the

subject i.e. the subject will appear to be closer.

Digital zoom TELE : When the maximum (3X) optical zoom is selected, pressing the ZOOM T button activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (3X) is achieved, pressing the ZOOM T button will have no effect.

Pressing

 

Pressing

the ZOOM

 

the ZOOM

T button

 

T button

[WIDE zoom]

[TELE zoom]

[Digital zoom 3.0X]

26

Page 27
Image 27
Samsung EC-M110ZSFB/RU manual Setting up the recording function using the camera buttons, Power button, Shutter button