Samsung EC-NV9ZZPBA/RU, EC-NV9ZZSBA/FR manual Adjusting the ISO speed, Shooting in the dark, Option

Shooting in the dark

Option Description

•The flash fires and the shutter stays open longer.

(Slow Sync) • Select this in the evening or in the dark.

•It is a good idea to use a tripod to prevent your photos from blurring.

•The flash will not fire.

(Off)	•	Camera shake warning ( ) is displayed in
		the dark.
	•	The flash fires when the subject or
(Red Eye Fix)*		background is dark.
	•	The camera corrects red-eye through its
		advanced software analysis.

The options may differ depending on the shooting mode.

*There is an interval between two bursts of the flash. Do not move until the flash fires a second time.

•Flash options are not available if you set burst options or select Self Portrait or Blink Detection.

•Make sure that your subjects are within the recommended distance from the flash. (p. 87)

•If there is reflected light or much dust in the air, tiny spots may appear on your photo.

Adjusting the ISO speed 1

ISO speed is the measure of a film’s sensitivity to light as defined by the International Organisation for Standardisation (ISO). The higher ISO speed you select, the more sensitive to light your camera becomes. With a higher ISO speed, you can get a better photo without using the flash.

1 In Shooting mode, press [Fn].

2 Press [w] or [r] to select ISO.

3 Press [e] or [t] to select an ISO speed option. 4 Press [MENU/OK] or [Fn].

•The higher ISO speed you select, the more image noise you may get.

•When Motion Capture is set, ISO speed will be set to Auto.

•When you set the ISO speed to 3200, the resolution will be set to .

Shooting Options 42